Relationship between the dynamic softening transition and wet sliding friction of elastomer compounds

For properly chosen elastomer compounds, thermorheological characterization is combined with an examination of the variation of the wet sliding friction with temperature. A conceptual argument leads to the assumption that the wet sliding friction should maximize at the energy dissipation peak associated with the dynamic softening transition at a characteristic frequency determined by the sliding speed and the effective smallest surface asperity scale. The dynamic softening transition is characterized with the peak in tan δ/G′ⁿ, where tan δ is the loss tangent, G′ is the elastic modulus, and n is a constant between 0 and 1. The William–Landel–Ferry transform is uncritically applied for extrapolating the position of the peak in tan δ/G′ⁿ at high frequencies. Even based on the criterion of tan δ, the results obtained on a concrete surface indicate that the effective smallest asperity scale is of order of 100 μm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2467–2478, 2004     

水相湿法改性纳米碳酸钙表面性质的研究

用特定的表面改性剂在水相中对纳米碳酸钙的悬浮液进行了湿法改性。红外光谱和热失重分析证明,改性剂与碳酸钙之间以化学键结合;沉降体积和接触角的测定结果说明改性粒子在液体石蜡中的润湿性和疏水性得到了提高;透射电子显微镜照片显示改性粒子在液体石蜡中有更好的分散性;体系粘度实验表明改性粒子与液体石蜡之间有较好的相容性。     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

Decomposition of vegetables for determination of Zn,Cd, Pb and Cu by stripping voltammetry

A simple and accurate digestion method using nitric acid, perchloric acid and hydrogen peroxide has been developed for use in trace analysis for heavy metals in vegetables by differential pulse anodic stripping voltammetry. The recovery of the metals from the samples is lower if the hydrogen peroxide is omitted from the digestion mixture. Standard reference materials have been analysed satisfactorily by this method.     

TiO_2-CeO_2催化剂湿式氧化苯酚的活性研究

采用共沉淀法制备了湿式氧化降解苯酚的TiO2-CeO2催化剂,测定了反应过程中不同反应时间的COD去除率,结果表明,当Ti、Ce摩尔比为3∶1时,在150℃、总压5MPa(其中氧分压4.5MPa)时,所制备的催化剂活性最高,反应90分钟COD去除率可以达到71%.对催化剂进行了比表面积、XRD和XPS测试,结果表明,高效的催化剂具有较多的活性位、催化剂粉末体系Ce的变价特性以及大量的表面吸附氧.     

Catalytic wet air oxidation of oleic acid on ceria-supported platinum catalyst.effect of pH

Summary Catalytic wet air oxidation (CWAO) of oleic acid was carried out in a batch reactor on platinum supported ceria catalyst (Pt/CeO₂). Oleic acid is a water insoluble linear unsaturated fatty acid of 18 carbon atoms. To increase the homogeneity of the solution by saponification, the influence of NaOH additions in oleic acid CWAO mechanism and catalyst performances have been investigated. The oxidation of such molecule occurs by two types of mechanisms: successive carboxy-decarboxylation which leads essentially to CO₂and/or C-C bonds splitting in the alkyl chain inducing a high formation of acetic acid. With or without NaOH, the 5%Pt/CeO₂catalyst is active in the conversion of oleic acid and selective to carbon dioxide. In alkaline medium, oleic acid is initially saponified which increases the solubility of the reactant before it to be oxidized. Finally the oxidation is slightly delayed by the presence of NaOH. The catalyst characterizations show no significant difference before and after reaction.</o:p>     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

Effect of tetrahydrofuran on the conductance and ion-pairing of hydrogen chloride in wet and dry methanol mixtures

The molar conductance of dilute solutions of HCl in wet (68.5% methanol + 31.5% tetrahydrofurane mixtures at 25°C have been measured. The data were analyzed using the Fuoss-Hsia equation to calculate the infinite dilution molar conductances and association constants. The trend of the limiting conductances in these mixtures as a function of the water content shows, once more, the peculiar minimum due to the anomalous proton conductance mechanism. From these data the limiting molar conductance in the anhydrous binary solvent system was evaluated. The percentage excess proton mobility with respect to potassium ion has also been determined. All these data are compared to those found in a binary isodielectric methanol mixture containing as cosolvent 1,4-dioxane. This comparison shows that proton mobilities are very similar in both solvent mixtures. The dielectric constants, refractive indices, viscosities and densities of the methanol-tetrahydrofuran mixtures in the whole mole fraction range have been measured and are reported. An analysis of the excess molar volumes and viscosities shows a slight deviation of this system from ideality.     

Material transport between the atmosphere and sediment of the Lake Balaton

A monitoring system was developed to gain information on the present level of pollutants in the Lake Balaton, Hungary. Determination of 13 polycyclic aromatic hydrocarbons (PAHs) and inorganic pollutants (mostly toxic metals) in aerosol, precipitation and sediment samples was carried out. The aim of collecting aerosol and precipitate samples in the same site at the same period was to determine the distribution of elements in two depositions. For the fractionation by particle size, aerosols were sampled by a cascade impactor. A simple three-stage sequential leaching procedure was applied to establish the distribution of metals among environmentally mobile, bound to carbonates and oxides, and environmentally immobile, (bound to silicates) fractions in aerosols. Sediment samples were collected from 17 different sites inside of the lake and 10 sites at harbors at 30–70 cm in depth. Core samples were cut to 10-cm pieces, dried at room temperature, and finally passed through a 63-μm sieve. Total concentrations of elements were determined by atomic absorption spectrometry (AAS) after an acidic digestion. The concentrations of PAHs were determined by HPLC method with fluorescence detection.In aerosol samples collected from September 6, 2002 to January 26, 2003, concentration of Cd was <0.1 μg/m³, and the majority of Cd has been found in the mobile fraction. Cadmium was associated to particles between 0.25 and 2 μm indicating the anthropogenic origin. Similar distribution of Pb was obtained in all seasons, and the highest concentration of Pb was found as 8.6 ng/m³ in particle size of 0.7 and 1.4 μm. Results of total concentration of elements of bottom sediments of the Lake Balaton and harbors were compared to Interim Sediment Quality Guideline (ISQG) values and the Probable Effect Level (PEL) values. Data showed that the average concentrations of elements were usually less than those of ISQGs and other background data for soils and geochemical values. The sediment is not polluted and its disposal is feasible. There is no direct correlation between the concentration of elements deposited onto the surface of the lake from dry and wet deposition and the upper part of the sediment. So, from the budget of the deposition, the concentration of elements in the upper layer of the sediment cannot be predicted.Seasonal changes of the concentration of PAHs in aerosol was observed, samples collected at winter contained the highest values. In December–January 2002/2003, the wet deposition was found as 64 μg/m² period. Among the individual compounds, the wet deposition rate of phenantrane, fluoranthene and pyrene was dominant, while for dry deposition, these compounds were fluoranthene and pyrene. The concentrations of ∑PAHs found for all sites and depth of sediment samples ranged from 11 to 1734 μg/kg dry weight with an average of 132 μg/kg. These values represent a quite low pollution level compared to other sediment with anthropogenic influence. Based on the results, it can be definitely confirmed that the chemical quality of the water and sediment of the Lake Balaton is satisfactory.     

锂离子电池锡氧化物基负极材料的湿化学合成与电化学性质

采用新兴的湿化学方法合成了锡氧化物基粉末材料。用X-射线衍射、扫描电镜和电化学方法对材料的微观结构、形貌和电化学性能进行了详细的研究。结果表明，经400 ℃热处理4 h的锡氧化物基材料的颗粒大小均匀，平均粒径约为200 nm。这种材料的可逆充电容量超过570 mAh·g^-1，30次循环后平均每次循环的容量衰减只有0.15%。良好的电化学性能表明锡氧化物基材料有望作为新一代锂离子电池的负极材料。